Best Track Saw Review Guide For 2023-2024

Best Track Saw Review Guide For 2023-2024 – Track saws are ideal for slicing up sheet materials cleanly and accurately, and they’ll cut lumber and other materials, too. Track saws may look similar to a circular saw you can buy for a fraction of the price, but that’s where the common ground ends. Their blades retract into a shrouded guard until you thumb a release lever and pivot the motor assembly down to begin cutting. It enables these saws to either plunge into a surface — a great thing for flooring contractors or remodelers — or be fed into the edge of workpieces conventionally.

But for us woodworkers, there are other advantages. A track saw’s base fits over the channel of an aluminum guide rail and follows it for making laser-straight cuts. The edge or edges of the rail also have a pliable sacrificial strip that supports the workpiece where the blade teeth exit on the top side. It reduces the incidence of lifted fibers or chipping where an ordinary circular saw could leave a ragged mess.

Most of the motors on these saws have soft start, variable speed and electronic feedback circuitry like a good router, and a dust port on the blade guard whisks away debris before it has a chance to escape. Keep reading this Best Track Saw Review Guide For 2023-2024 to find out more.

Best Track Saw Buyers Guide For 2023-2024:

What is a Track Saw:

There are many power saw types that you need to have in the workshop, and if you want something for making long and accurate cuts on sheet material the track saw is one of the best.

While the track saw might look like a circular saw its functionality goes beyond that of a circular saw, and it makes some cuts that will be impossible to achieve with the latter.

Also, like the table saw the track saw also features a fast spinning blade. But unlike the table saw you take it to the material instead of bringing the workpiece to the blade.

One of the unique elements that set the track saw apart from the other is the presence of a track. This track not only helps to keep the material in place but also eliminates the need for measurements or making guesses as it guides you on where to cut.

The blade on the track saw also retracts into a shrouded guard to ensure that you do not cut the material until you are ready.

Benefits of a Track Saw:

Even if you own many other power saws such as the circular and table saws, the track saw still comes with many benefits which are the reasons why you need to buy one. And they include the following 4.

1. Clean Cuts

One of the biggest advantages of the track saw over other types is that it produces some clean cuts. Whether you are cutting MDF, plywood, solid wood and any other sheet materials, this saw will deliver a cut without unsightly bits on the edges or tear-outs.

2. Exact Track Alignment

The track that comes with this saw is another big benefit as it eradicates guesswork by providing an exact alignment with the cut line. And this also minimizes the measuring tasks to some extent.

With this saw, you will only need to align the track with the marks for your cut, and you will end up with an ultra-straight cut.

3. Long Cuts

Track saws make it possible to make some super longs cuts that would be hard to achieve with the same level of precision when using other power saws.

The only things that will limit the length of the cut that you can make are the track and cord length of the saw. But you can increase the length of the tracks by using connectors.

4. Relatively Compact and Highly Portable

Few woodworkers will have unlimited workshop space and so almost every inch of space counts. And so the fact that the track saw does not take up a lot of space and does not require you to dedicate permanent space to it is a huge benefit.

Also, this saw is highly portable, and you can move it from one job site to the other with ease. All you need to do is tack the track under one arm and carry the lightweight saw on the other.

Can Track Saws Replace Table Saws:

The track saw comes with many benefits and so it is always a great addition to the workshop. But it will also perform some similar roles as the table saw (to some extent) such as cutting large sheet material.

Its versatility and the fact that it produces some clean, smooth cuts is what make some woodworkers view it as a portable, cheaper and safer alternative to the table saw.

However, as handy as a track saw might be it will not replace your table saw as it also has some limitations. For example, most track saws will not make cuts that are deeper than 2 inches and will not be very useful for cutting a lot of material into similar sizes.

Also, the track saw feels a little clumsy when dealing with smaller pieces of wood. The table saw can cut into almost any lumber size and do it with ease.

And so the bottom line is that a track saw will not replace your table saw, but it will mean that you will end up using it less often.

SHOP FOX W1835 Track Saw

If you want to save time and money, then check out this saw. It’s a useful tool for household and workshop applications alike. Plus, with the extra safety features and lower price tag, you will feel confident in this purchase.

Product Details:

• 120-Volt, 9A, 1.1 kW, 5500 RPM
• Blade rim speed is 9070 feet per minute
• Blade size is 160mm diameter and 20mm arbor
• Features 1-1/2-inch dust port for collection to a shop vacuum or dust collection system
• Portable and highly accurate
• Works at speeds up to 5500 RPM
• Includes anti-kickback protections
• Comes with a 2-year warranty
• It has cutting depth ability of up to 2-5/32 inches

Pros:

• Excellent value
• Quick set up dust containment, many say that we were able to finish faster
• Many users were overall pleased with all the functionality they got for the price

Cons:

• No track included
• Some customers felt the blade was a bit lacking, leaving rough edges on occasion. Changing blades increased performance.
• Some also stated they felt it was underpowered, so be sure to know what projects you’ll be undertaking.

Frequently bought together:

SHOP FOX D4362 Guide Rail for W1835, 55-Inch
SHOP FOX D4363 Accessory Pack for D4362 Guide Rail

Triton TTS1400 6-1/2-Inch Plunge Track Saw 1400W

The TTS1400 Plunge Track Saw is a highly versatile, feature packed tool with easy mode selection, fast set-up and advanced safety features. It’s powerful 1400W / 12A variable speed motor has a no-load speed of 2000-5300rpm. The mode selector allows quick change between free plunge, scribe, or blade change. Blade changing is safe and easy, The power switch locks out during the blade changing process, and the blade is easily accessed through the blade guard without having to remove the cover. Soft-grip handles. Fits to guide track system for smooth, precise straight and bevel cutting and the flat design of the blade housing means the saw will work right up to the edge of the work piece – ideal for trimming doors and cutting hardwood flooring. On-board tool storage. Variable speed with soft start and constant speed electronics. Includes 6-1/2-inch (165mm) 60TCT blade. Bevel range of 0-48Degree. Requires either the TTSTP track and/or the TTST1500 track for Saw operation. Tracks sold separately.

This saw will greatly improve your toolkit. It allows high accuracy cutting most of the time, and it’s got the power to get through tough jobs. When you need an affordable saw that delivers, it’s right here.

Product Details:

• 110 Volts of power
• Rotates at speeds of 5300 RPM
• Has anti-kickback features for improved safety
• Motor allows for variable speed
• Comes with a dust outlet adapter for easy cleanup
• Requires either the TTSTP track and/or the TTST1500 track for Saw operation. Tracks sold separately.
• Easily accessible shaft lock for fast blade-change
• Soft-grip handles for comfort & control and a Plunge lock for safety
• Universal vacuum system adaptor with 360 Degree rotational outlet
• Saw comes with a 48TCG Saw Blade, a Dust Outlet Adaptor and a pair of Carbon Bushes. All of the required and optional accessories sold separately
• Other compatible Triton accessories for use with the Triton TTS1400 Plunge Track Saw: TTSWC, TTSCB1500, TTSCB700, TTSSB, TTS60T, TTSAG, TTSDES, TTSPG, TTSTC

Pros:

• Woodworkers enjoyed the smooth operation the Triton offers.
• Also, highly noted was the dust collection feature.
• Most cuts are highly accurate once the track saw is set up.

Cons:

• Unfortunately, the set up can require quite a bit of attention to get squared away.
• Some users said there’s some vibration that causes less accurate cutting

Frequently bought together:

Triton TRTA001 Router Track Adaptor

Dewalt DCS520B 60V Max Cordless Track Saw

The DEWALT DCS520B 60V MAX* 6-1/2″ (165mm) Cordless TrackSaw (Baretool) offers cordless convenience with the power of a corded tool! This is a zero clearance TrackSaw(TM) cutting system that delivers straight, splinter-free, precise cuts. For use with TrackSaw(TM) dual edged tracks for perfectly straight cuts in both directions. A brushless motor effortlessly powers through hardwoods up to 2-1/8″ thick. On-track cut depth; 2-1/8″ @90 degrees and 1-5/8″ @ 45 degrees ; depth of cut scale accurately accounts for thickness of track. It has a continuous anti-kickback mechanism and riving knife which prevent kickback when engaged. This saw also features a straight plunge mechanism for optimal ergonomics, with an enclosed low profile guard gives a 90% dust extraction capability. Specifications: Blade diameter = 6-1/2″, No load speed = 1750-4000 rpm, Bevel capacity = 47 degrees, Max cut at 90° = 2-1/8 in., Max cut at 45° = 1-5/8 in. **This is a baretool item – battery sold separately. Includes: 1) DCS520 6-1/2″ (165mm) TrackSaw, 1) Blade, 1) Blade change wrench.
This saw is a solid pick for builders looking for smooth finishes and solid power. It doesn’t require in-depth knowledge for use. If you want to purchase a saw that will live past paying for itself several times over, this one’s for you.

Product Details:

• Zero clearance TrackSaw(TM) cutting system delivers straight, splinter-free, precise cuts
• For use with TrackSaw(TM) dual edged tracks for perfectly straight cuts
• Continuous Anti-Kickback mechanism and riving knife prevent kickback when engaged
• Straight plunge mechanism for optimal ergonomics
• Enclosed low profile guard gives a 90% dust extraction capability
• Battery & Charger Sold Separately
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
• It has a cutting capacity of 2-1/8″ at 90°
• At 45°, the cutting capacity is 1-5/8″ “
• It has a 12 AMP motor
• No load speed from 1750-4000 RPM
• Contains bevel capacity of 47°

Pros:

• Cordless model is very useful on job sites
• Precise and clean saw cuts
• Tough durability
• If you use it often and for big projects, you can rest assured that it will hold up well for years to come.

Cons:

• You won’t get the same power as a corded track saw.
• Will need replacement batteries for big projects
• Sold as bare tool without tracks or battery.

Frequently bought together:

DEWALT Track Saw Track, 59-Inch (DWS5022)
DEWALT Clamp For Tracksaw (DWS5026)

Makita SP6000J1 Plunge Circular Saw Kit

Get precise, accurate cutting and a splinter-free mirror finish, without the table saw. Makita’s SP6000K 6-1/2-Inch Plunge Circular Saw delivers smooth, straight cuts. When you combine it with an optional guide rail system, constructed with anodized aluminum, the saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 amp motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000K is a more portable option to a table saw and is ideal for use on the jobsite or in the shop. Includes 55 inch guide rail. Do not expose power tools to rain or wet conditions. Ideal for cutting large wood panels and other wood materials in confined areas.
If you’re not a contractor then this is a great alternative track saw for the money.

Top end track saws easily cost $600+ but with the Makita you can get a trusted brand for much less!

The Makita SP6000J1 is a popular model with a lot of positive reviews from users who have stated that it has lasted the test of time.

Product Details:

• Item may ship in more than one box and may arrive separately
• Powerful 12.0 AMP motor for optimum performance in a wide variety of materials
• Precision accurate cutting delivers a splinter free mirror finish
• Electronic speed control maintains constant speed under load for smooth cutting
• Variable speed control dial (2,000 5,200 RPM) enables user to match the speed to the application
• Large cutting capacity (2 3/16 inches at 90 and 1 9/16 inches at 45). Cord Length 7.9 feet
• Powerful 12.0 AMP motor for optimum performance in a wide variety of materials
• Precision accurate cutting delivers a splinter-free mirror finish
• Electronic speed control maintains constant speed under load for smooth cutting
• Variable speed control dial (2,000-5,200 RPM) enables user to match the speed to the application
• Large cutting capacity (2-3/16″ at 90 and 1-9/16″ at 45)

Pros:

• High quality track saw which is excellent value for money
• Many users have noted it has lasted the test of time
• Great alternative to more expensive track saws
• Excellent dust collection
• A good but if you’re a small business carpenter

Cons:

• Not recommended if you’re a contractor.
• Only metric units are displayed (if you’re used to imperial measurements)
• Some experienced users noted the guard rail is not perfect compared to say a Festool one.

Frequently bought together:

Makita P-45777 Guide Rail Connector Kit
Makita 194368-5 55-Inch Guide Rail

Festool TS 55 Req Plunge Cut Track Saw

The TS req is not your standard Circular saw. With its accuracy and versatility, a better comparison would be to the most advanced Table saws, Miter saws or panel saws available. Add in its incredible portability and unbelievable ease of use, and you have a precision-cutting solution like No other, at home in the highest-end cabinet shop as well as an Onsite remodel. With the addition of Micro-Adjustable depth controls and a Flat housing for flush-cutting against walls or adjacent surfaces, the TS 55 req is our most advanced plunge cut saw ever, which is saying a lot.

Product Details:

• When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
• Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade.
• This reduces the chance of kickback. Antistatic function
• Blade changes are easier and safer using the fastfix system which locks switch and arbor simultaneously for easy arbor bolt removal.
• Power consumption 1200 watt.
• The smaller version of TF75
• Handles power at 120 volts
• Includes splitter to reduce kickback
• Splinter-free cutting when used with guide rails
• Adjustable depth gauge (imperial units)
• Cuts bevel angles up to 45 degrees

Pros:

• Ideal choice for those wanting a smaller / lighter version of the TF75
• Extremely powerful – handles hardwoods with ease
• Highly accurate cuts
• Ideal for professionals
• Will handle most jobs for 95% of people

Cons:

• Overkill for the casual user

Frequently bought together:

Festool FS-1400/2 55″ Guide Rail (1,400 mm)
Festool 482107 Guide Rail Connector

Festool 575389 Plunge Cut Track Saw

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4″ thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.
If you’re familiar with Festool tools, then you already know what they offer – Superior quality tools that are highly accurate and built to last.
This saw is a solid purchase that will last you through any project, no matter the length or complexity. You will retire the rest of your cutting tools once you use The Plunge Cat. Make sure to get the tracks for optimal performance.

Product Details:

• When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
• Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade.
• This reduces the chance of kickback.
• The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
• Blade changes are easier and safer using the fastfix system which locks switch and arbor simultaneously for easy arbor bolt removal.Saw Blade Speed:1,350 – 3,550 rpm

Pros:

• Ideal choice for contracts and heavy users alike
• Rips through hardwoods with ease
• Designed to cut thick sheets
• One of the most accurate track saws on the market
• Makes light work of long pieces of lumbar

Cons:

• None.

Frequently bought together:

Festool FS-1400/2 55″ Guide Rail (1,400 mm)
Festool 482107 Guide Rail Connector

Conclusion:

Using a track saw has many benefits. For example, it gives you a precise and smooth cut, and it keeps your workplace clean. It is crucial for you to assess your needs and understand the materials that you are going to work with
before you pick your tool. With that said we hope this Best Track Saw Review Guide For 2023-2024 was helpful.