Best Rust Converter Review Guide For 2023-2024

Best Rust Converter Review Guide For 2023-2024 – The problem with having a rust spot on your vehicle is not only that it looks bad but also because rust has a tendency to spread further. That’s right, once rust has begun on a piece of metal, it will continue to spread until it has consumed all of the metal. And that can cause the vehicle owner to have to spend a ton of money on the vehicle’s bodywork.

Fortunately, there is a way to stop rust from spreading further, and that’s by using the best rust converter available. These products render rust inert, so it doesn’t spread any further, and so it can be easily primed and painted over properly. These products are extremely useful, so we decided to review the best ones currently available. Brands that we’ve listed in our Best Rust Converter Review Guide For 2023-2024 are below.

Best Rust Converter Buyers Guide For 2023-2024:

When left to the elements, expect rust to fester and spread. If you neglect it, this can lead to expensive repairs, not to mention the fact that no one is going to want to buy your car if this is where the problem is. This is why a lot of people turn to a rust converter to get rid of this issue.

When you buy an effective product, it doesn’t take long to stop the spread or prevent it from forming altogether. They can be used on just about any metal surface so it is important to make sure you get a quality product. The following guide is designed to make this purchase simple.

What To Look For In A Rust Converter:

Easy To Apply:

A rust converter can come in different forms. Sometimes a liquid can be best for your needs although there are water-based products that you will have to pre-mix before using.

The best rust converters are the ones that comes in a spray form so you get a wide coverage and an easy application. Alternatively, a product you have to brush on can mean you are accurate and even in applying the fluid.

Drying Time:

No one likes to stand around waiting for a rust converter to finish drying before they can use the tool they have primed or move onto the next stage if the area needs painting.

The better products won’t take too long to dry although a lot of products can take up to 24 hours. If the drying time is important to you, choose one that takes a matter of minutes, not hours, as some products can dry within 20-minutes.

Easy To Clean:

Because a spray rust convert can mean the product gets into different places, it is important to find one that is easy to clean. The majority of products should be fine in this area but those will fewer harsh chemicals will require less elbow grease to remove.

Quality:

For it to be worth buying it has to protect the metal to ensure that rust is not a reoccurring problem or never shows up at all. Look to the ingredients to be sure it has the right type of actve ingredients such as tannic acid and an organic polymer.

Low Toxicity:

Not only is this safer for the user but it can also stop it from being as flammable. Of course, you should never use one around a flame and ensure that you are using it for its intended purpose.

Rust Converter Vs Rust Remover:

Sometimes a rust converter is a more appropriate product to use and a lot will depend on the level of rust and the type of metal it is on. When it is widespread on the surface a rust converter can be a good option as it conceals the rust and helps to protect it from spreading further.

Those who want to remove rust will have to deal with more toxic chemicals and should use them with extreme caution due to the hazardous ingredients. Not only will you have to sand the rust away before application you will also have to prime and paint the area to protect it. The best way of preventing the area from further corrosion is by using the best rust converter you can find.

What Can A Rust Converter Be Used On?

Virtually any metal surfaces can be protected with a rust converter although some of the most common include steel and iron. This opens up a lot of possibilities and you will find a rust converter is often used on vehicles, stairs, fences, mowers, cast iron, tools, and a lot more.

How To Remove Rust With A Rust Converter:

The easiest way to make sure the brand you use works to its best capabilities is by following the instructions as every product will differ slightly. A general rule is to work as follows:

Start by scraping at the rust to lift the surface rust before sanding it down. This is because a rust converter works best on smooth surfaces and be sure to get rid of as much debris as possible so no rust is left behind. Next, spray or brush the rust converter (depending on the product) and leave it to dry. This might take a while unless you use a fast-drying rust converter but when it has dried you can paint the surface an appropriate brand of metal paint.

Do I Need To Paint The Surface After Using A Rust Converter?

Although a rust converter will help to protect the surface after you have used it, the best way of prolonging the results is by painting it. This stops the metal from being exposed to the elements and keeps moisture out.

Gempler’s Fast-Rust Primer & Converter

This simple-to-use product comes in an aerosol can that allows it to be used exactly where it’ needed. Once applied, this product immediately goes to work and not only prevents further rust spread but also creates a primed surface that’s ready to be painted in 48-hours. The great thing about this product is that it doesn’t require any further processing to be effective. This means that it doesn’t need to be ground down, sanded or scraped before it can be painted. All of this makes it a great product, although it does cost more than most other brands.

Product Details:

• SIMPLY SPRAY ON AND RESTORE YOUR INVESTMENTS WITHOUT BREAKING A SWEAT – GEMPLER’S Spray-on Aerosol Rust Converter stops rust dead on tools, vehicles, tanks or anything with a rusted steel/iron surface by chemically converting the rust into an inert, black protective barrier.
• WORKS AS BOTH A PRIMER AND RUST CONVERTER – Once sprayed on, GEMPLER’S Rust Converter also functions as a highly effective primer, making the treated surface ready to re-paint with an oil-based paint in just 48hrs.
• IDEAL FOR HARD-TO-REACH AREAS & SMALL PROJECTS – This handy aerosol spray allows you to apply the Rust Converter into difficult-to-reach areas and onto hard-to-paint surfaces; it’s also perfect for small projects or just touching up small rust spots.
• EASY TO USE & HIGHLY EFFECTIVE – Lightly brush away any loose scale and rust with a wire brush, then apply four coats of GEMPLER’S Rust Converter formula evenly onto your chosen surface. 1 can covers approximately 24 sq ft.
• NO SANDBLASTING NEEDED – Using GEMPLER’S Aerosol Rust Converter removes the need for sandblasting, heavy scraping or grinding down rusted surfaces prior to use. It’s the fastest and most convenient way to convert rusted surfaces.

Pros:

• Aerosol is easy-to-use
• Provides great results

Cons:

• Costs more than comparable converters

Gempler’s Rust Primer & Converter All-In-One

Gempler is a trusted name in the automotive rust prevention industry, so it should be no surprise that they make a great rust converter product. This product will not only stop the further spread of rust, but it also acts as a primer that’s ready to accept an oil-based paint in just 2-days. Although the bottle this product is contained in could’ve been easier to use, this product nonetheless provides good coverage. And because it primes the surface, there’s no need to scrape, grind or sandblast the surface to prepare it for painting.

Product Details:

• RESTORES YOUR OLD INVESTMENTS WITH TOTAL EASE – GEMPLER’S Rust Converter stops tools, vehicles, tanks or anything with a rusted steel/iron surface from rusting further by chemically converting the rust into an inert, black protective barrier.
• WORKS AS BOTH A PRIMER AND RUST CONVERTER– Once painted on, GEMPLER’S Rust Converter functions as a highly effective primer, making the treated surface ready to re-paint with an oil-based paint in just 48 hours.
• EASY TO APPLY & GOOD COVERAGE– Just use a normal wire brush to remove any loose or layered scale and rust, then apply GEMPLER’S Rust Converter with a regular paint brush or sponge. 1 Quart covers up to 125 sq ft.
• NO NEED TO SANDBLAST SURFACES – GEMPLER’S Rust Converter removes any need for sandblasting, heavy scraping or grinding down old rusted surfaces prior to use. It’s the fastest and easiest way to convert and restore old rusted surfaces.
• ECO-FRIENDLY – GEMPLER’S Rust Converter is environmentally safe, non-flammable, and made from an easy clean-up water-based formula.

Pros:

• Provides good coverage
• Is both a rust inhibitor and primer

Cons:

• Can be difficult to apply

Total Boat Professional Metal Treatment

When professional results are needed, then this product is ready to get the job done. It’s a thin formula that can cover up to 500 square feet of surface area per gallon and immediately stops the spread of rust. Although this gallon container might be a little bit too much for most people, it is an economical choice for professional body shops. All that has to be done to apply it is to use a spray bottle or brush to add it to the surface and then let it dry fully overnight. The next day, the surface is then ready for priming or painting.

Product Details:

• Paint, prime and convert rust in one step – water based rust converter with latex metal primer
• Restore metal surfaces, extend life of metal equipment by protecting it from rust and corrosion
• Non-flammable and non-corrosive, water-based formula cleans up with just soap and water
• Easy to apply – brush, roll or spray; apply at 8-10 mils wet for 200-250 sq ft per gallon coverage
• Use for all marine, automotive, general household and industrial applications
• Corroseal should not be applied over freshly blasted steel, or new galvanized surfaces

Pros:

• Provides profession results
• Easy-to-apply

Cons:

• Might be a bigger container than what most people need

FDC Rust Converter Ultra

This product might cost more than comparable products, but it produces some great results. One gallon will cover approximately 500 square feet of any nonporous surface and instantly converts rust into a black surface that’s suitable for painting. This product is easy to use, dries quickly and the surface it’s used on doesn’t require any further processing such as scraping or sandblasting. And because it seals out moisture, it prevents further rust from developing on the surface.

Product Details:

• CONVERT RUST: Convert rust to an inert coating that seals out moisture to prevent further corrosion
• SAFE TIME & MONEY: Eliminates the need for sandblasting, grinding or scraping
• EFFICIENT: 1 Gallon Covers 500 square of smooth, nonporous surface – That‘s an entire Dumpster!
• ULTIMATE PROTECTION: Convert toughest rust and corrosion caused by all types of weather conditions
• MULTI-USE: Use for automobiles, machinery, railings, structures, tools, marine applications and more! 30 DAY HASSLE FREE MONEY BACK GUARANTEE – We value our customers and we stand behind ALL of our products 100% with no questions asked! If you are not pleased simply call or email us with your order number and we will reimburse you in FULL!

Pros:

• Provides 500 square-feet of coverage
• Converts rust immediately
• Provides professional results
• Surface doesn’t need sanding or grinding

Cons:

• None

Corroseal Water-Based Metal Rust Converter

This quality product is easy-to-apply and produces great results. It’s a non-flammable and non-corrosive formula that’s easy to clean up using only water and soap. This product also immediately stops rust on any metal surface and can be used for a variety of all applications including automotive, marine, general household or even industrial projects. Although it’s supposed to prime the surface as it stops rust, we’ve found that the surface does benefit from some light sanding to avoid bubbling or a swirl effect in automotive paint.

Product Details:

• Paint, prime and convert rust in one step – water based rust converter with latex metal primer
• Restore metal surfaces, extend life of metal equipment by protecting it from rust and corrosion
• Non-flammable and non-corrosive, water-based formula cleans up with just soap and water
• Easy to apply – brush, roll or spray; apply at 8-10 mils wet for 200-250 sq ft per gallon coverage
• Use for all marine, automotive, general household and industrial applications
• Corroseal should not be applied over freshly blasted steel, or new galvanized surfaces

Pros:

• Easy-to-apply product
• Stops rust instantly

Cons:

• Surface still needs some light sanding after use

Conclusion:

We hope you found our Best Rust Converter Review Guide For 2023-2024 helpful.