Best Jack Stand Review Guide For 2020-2021

Best Jack Stand Review Guide For 2023-2024

February 12, 2023

Best Jack Stand Review Guide For 2023-2024 – Working on your car can be very satisfying, even if you don’t consider yourself a car enthusiast. There is a lot of maintenance you can do yourself, and a lot of it is pretty easy, but you have to make sure you have the right equipment. If you’re not equipped properly, it can be dangerous and can lead to serious injuries or even death.

This is especially true with using jacks. Jacks are designed to lift a car, but not hold it up. Although you can use a jack to hold up your car, it’s not advised because they can fail and the consequences can be catastrophic. Imagine lying under your car when the jack fails—it’s not a pretty picture.

That’s where jack stands come in. These inexpensive devices improve safety while you’re working on your car — they are designed to keep the car lifted in case the jack fails. It’s a no-brainer—if you plan to work on your car, specifically underneath it, you need jack stands.

Quick tip: always buy a jack stand that has a capacity that can hold the entire weight of your vehicle, measured in tons. Here are the best jack stands you can buy in our Best Jack Stand Review Guide For 2023-2024.

Best Jack Stand Buyers Guide For 2023-2024 :

What is a Jack Stand?

Designed to support the weight of a vehicle lifted off the ground, jack stands are essential if you’re working underneath your car. Don’t be fooled into thinking a floor jack is enough to safely support the weight of your car. You’ll want jack stands to secure the vehicle, rather than relying on the floor jack, which can slip or fail leading to a potentially fatal disaster. Most jack stands have a similar shape and design but there are a few things you need to know before choosing the right one.

How to Choose the Right Jack Stand:

The most important factor when shopping for jack stands is to check their load ratings. Most jack stands will say they support 2 tons and up, but keep in mind that’s typically for a pair of jack stands. So if you’re purchasing a pair of 2-ton jack stands, each stand is actually rated to support 1 ton. Check the weight of your vehicle to make sure the jack stands you’re purchasing will support the weight of your vehicle.

To do this, look for your vehicle’s curb weight in your owner’s manual and ensure the jack stands you’re purchasing will support the curb weight of your car. Keep in mind that the weight distribution of your vehicle likely won’t be even front to back, especially if your car has an engine up front. To be on the safe side, you’ll want to round up your vehicle’s curb weight when comparing the load ratings on the jack stands you’re purchasing.

Another factor to consider is the weight of the jack stand. Most jack stands are constructed of steel, which makes them a bit heavy and difficult to carry or move around. There are companies that manufacture aluminum jack stands, which will be lighter than their steel counterparts. If the weight of a jack stand is a concern, choose an aluminum option.

Lastly, if you own a crossover, SUV, or pickup truck, you’ll want to consider the lift height of a jack stand to ensure it can accommodate your vehicle. You’ll want jack stands that can be adjusted to a higher setting to support a crossover, SUV, or truck. The opposite applies too, if you own a lowered sports car or exotic. In that case, you’ll want a jack stand that has a lower starting height to make sure it fits underneath your car.

How to Properly Use a Jack Stand:

Anytime you’re lifting your car off the ground, the first thing you want to do is make sure you’re parked on a flat and level surface. Engage your car’s parking brake and use wheel chocks around your wheels. From there, locate a safe spot underneath your car for your floor jack—you can check your car’s manual to find the best places to lift your car.

Once your car is off the ground with the floor jack, set the jack stand underneath the pinch points of your vehicle. These are typically found on the sides of your vehicle, between the front and rear tires. If your car doesn’t have any pinch points, you can put the jack stands underneath your vehicle’s frame. Adjust the height of the jack stand as necessary and use the safety pin to keep it in place.

After that, slowly lower the floor jack so the car rests safely on the jack stands. Give your vehicle a good nudge to make sure it’s sturdy before going underneath it. When you’re done working on your car, lift it back up with
the floor jack, lower the jack stands, and remove them before slowly lowering your car back to the ground with
the floor jack.

BIG RED Torin Steel Jack Stands 3-Ton Capacity

This inexpensive pair of jack stands is very popular on Amazon for a reason. Torin is a well-known manufacturer in this field and all of their products are very high quality. The pair we have chosen here can support vehicles of up to 3 tons (6,000 lbs), which means that every vehicle, from compact cars, sedans and up to crossovers and SUVs will be covered. That said, some heavy-duty trucks weigh more – be sure to always check your owner’s manual for the weight of your vehicle.

The construction of the Torin Big Red Steel Jack Stands is rock solid. They’re made from high-grade forged steel and a welded frame design, so you can count on their durability. The saddles are also wider and deeper than in other jack stands, making them easier to place beneath the jacking points and safer as well. On top of that, they’re easily adjustable (ratcheting style) to a lot of different heights and are quick to use. In reality, there are not many negatives about these jack stands – for the price, they deserve to be in everyone’s garage.

Product Details:

Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks
Adjustable height ranges from 11-1/4″ to 16-3/4″ with a 3 ton (6,000 lb) load capacity
Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards

Pros:

Rock solid construction
high-quality materials
can support almost any car
durable
inexpensive

Cons:

Can’t support heavy-duty trucks

View Price On Amazon

Hein-Werner Blue/Yellow Jack Stands 3-Ton Capacity

If you plan to spend a little more money on a jack stand, then this Hein-Werner might be a good option. It’s made of a very high-quality steel that is strong and very durable. As a matter of fact, it feels more durable and strong than most items on our list – we think it can withstand a lot of abuse. It’s of the ratchet style type, which makes it very easy to use in a variety of different scenarios, albeit not as safe as pinhole type. It can carry up to 3 tons, which makes it similar to most of the items on our list. The formed base adds stability and reduces sinking into the pavement, while the wide saddle is very secure.

The reason why it is so low on our list is the price, which is simply too high for a jack stand made from steel that supports 3 tons. Competitors are much cheaper and can often be found for half the money. Sure, they may not be as strong, but we are sure that any item on our list is strong enough for best possible safety when working on your car.

Product Details:

Multi-position ratchet bar provides strength and durability
Formed base adds stability and reduces sinking into pavement
Pair of jack stands with a saddle column that provides ratchet action height adjustment
Country of Origin : United States

Pros:

Very strong and durable
wide saddle
ratchet style type for easy adjustment

Cons:

Expensive for a 3-ton jack stand

View Price On Amazon

BIG RED Torin Double Locking Steel Jack Stands 6-Ton Capacity

Own a bigger truck or an SUV? Then you might need a jack stand that can withstand the heavier weight. The Torin Double Locking, 6 Ton Capacity, as the name suggests, supports up to 6 tons, which make it usable in a lot of scenarios. These jack stands are made from a high-quality steel, for a heavy-duty construction that is very sturdy and durable. Being made of steel, they are on the heavy side, so we wouldn’t recommend them if you have a lighter vehicle, especially if you plan to keep them in the car.

As with other Torin products, they are carefully designed to meet almost everyone’s needs. We really like that the saddle has a large surface area, that the ratcheting style adjustment is fast and easy and that the jack stands can be adjusted from 15.4″ to 23.8″. On top of that, this product also has the double locking mechanism that is twice as safe as a single one. The most important thing with this Torin Double Locking 6 Ton jack stand is that it’s very cheap for what it offers, as with every other Torin product.

Product Details:

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV’s, UTV’s, and more
Features a lifting range of 15-3/8″ to 23-13/16″ with a 6 ton (12,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16″ x 6-7/8″
Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place; Meets ASME safety standards and includes a limited 1 year manufacturer warranty

Pros:

Solid construction from forged steel
double locking for more safety
great height adjustability
the saddle has a large surface area
inexpensive for a 6-ton jack stand

Cons:

A bit on the heavy side

View Price On Amazon

Sunex High Height Jack Stands 10-Ton Capacity

If you need a jack stand that can fly high then this is the one for you. The Sunex 1410 can go up to 46.5” in height, which is almost double of what every other jack stand offers, making it suitable for bigger services of any car, be it a sedan, SUV or a truck. The Sunex product is also very heavy-duty and can withstand the weight of up to 10 tons. In reality, this is enough even for mechanics, who can rely solely on this product for every maintenance service.

These jack stands adjust via pinholes, which is a more secure way, especially when the stand is set very high. The saddle is very big and is V-shaped. Thanks to that, it can be used to cradle axles or other components under the trunk. This is really an all-in-one jack stand. On the downside, it’s very expensive – for the same money, you can have the 22 Ton OTC on our list, so if you plan on supporting very heavy vehicles, then this jack stand is not for you. It’s also not very practical for lower cars, like sports cars for example.

On the other hand, if you need a jack stand that can go very high and can be used to support other vehicle components, then this is the one to have.

Product Details:

Item may ship in more than one box and may arrive separately
Four leg steel base
Made of heavy schedule pipe for added strength and stability
Quick and easy height adjustment
Large saddle with locating lugs support
V shaped saddle to cradle axles or other under truck components
Max Height 46.5-Inch

Pros:

Maximum height of 46.5 inches
heavy duty design can withstand 10 tons
the large saddle can be used even for some vehicle components

Cons:

not suitable for lower cars

View Price On Amazon

OTC Jack Stands 22-Ton Capacity

If you need the most heavy-duty jack stands, then you should go with a pair of OTC 1780s. These jack stands are specifically designed to withstand up to 22 tons, which makes them great for professional use. Sure, 22 tons are a lot, but if you want your jack stands to last a lifetime even when working on lighter and smaller vehicles, the OTC ones are the best bet.

There are several reasons why we’ve chosen the OTC 1780 jack stands, the most important being that they have a flat base, which prevents sinking into soft surfaces and even improves the longevity of the jack stand. These jack stands also meet the latest and most stringent ASME/PALD standards for lifting equipment. In some workplaces, meeting these standards is a must. This also means that you’ll be sure that these jack stands will hold the weight of almost any vehicle and always keep you safe.

On top of that, they can be adjusted in 3-inch increments, from very low to very high (12” to 20”), which means that they can be used for a variety of different maintenance services on a variety of different cars. The only caveat is that they are on the expensive side.